Makita HP457DWE reviews
Main advantage:
One of the most outstanding aspects of this Makita product is that it has a power of 1400W, so you can drill different surfaces without any problem. On the other hand, it includes 2 rechargeable batteries so you can avoid leaving jobs half done.
Main disadvantage:
A disadvantage in this product is that it does not have a charge meter, so you will not be able to know the percentage of its charge and you will have to use it until it runs out.
Verdict: 9.8/10
If among your plans you plan to acquire a hammer drill that has good power, speed management and includes rechargeable batteries, perhaps this model may be ideal for you.
Main Features Explained
Design and functions
Hammer drills are useful tools in the home, since with them we can perform drilling, screwing and even percussion, so if you plan to acquire one, one of the first characteristics that we recommend you evaluate is its design and the functions that it possess.
This product presented by Makita is made in a high-quality plastic casing, which will provide it with a light weight and sufficient resistance to withstand the different vibrations of tapping and drilling when you are using it. In addition, it has three different modes of use: drill, hammer and screwdriver, so you can carry out your DIY tasks at home or at work very efficiently and without needing additional tools.
On the other hand, at its tip it has a tightening and screwing torque ring so that you can adjust the force that the drill will exert, allowing you to select the one according to the type of material you are going to work on; starting from level 1 to 16. Likewise, in the ring you can also switch between the drill modes and in its upper part it has the speed mechanism so that you have much faster access and alternate between them.
Additionally, when you decide to use the drill mode (without hammer) you can change the bit and the speed so that you can have greater fluidity depending on the type of surface you are going to drill, whether it is thicker for concrete and thinner for wood or metal. according to depth.
Another outstanding feature that this Makita drill has is that you can change the bits very easily and without tools, since you will need to turn its tip to open and to the opposite side to close, allowing you to make changes without wasting time.
power and safety
When users look for opinions and review comparisons on the best hammer drills, another feature that is recommended not to be overlooked is the power that they are capable of exerting.
The Makita HP457DWE model has a power of 1400 revolutions per minute (rpm), which will allow the drill to easily penetrate different types of structures, whether they are cement, concrete, bricks, wood or metal. However, users recommend changing the bit and adjusting the speeds and tightening torque so that you can have more effective results.
In addition, it should be mentioned that, although its powerful 2-pole motor will allow drilling almost any structure, users advise that the manufacturer’s recommendations that are included in the user guide should be taken into account.
On the other hand, this hammer drill has an ergonomic non-slip handle that will provide you with adequate comfort and safety when you are drilling, since it will not slip, which will help to significantly reduce accidents mainly caused by equipment. electronic and DIY sharps.
In addition to this, it has a mechanism that works under pressure that will allow you to activate the operation of the drill. That is, it works like a gun, to activate it you must press and release the button to stop it.
On its sides it has ventilation holes that will allow the air flow to pass so that the drill remains in a cold state and does not heat up, which will prevent malfunctions, short circuits and the expulsion of dust generated by the perforations of the different structures.. Likewise, you can also use an air blower and place it in the vent holes to remove excess dust and any other particles that may interfere with the proper functioning of the equipment.
Autonomy and accessories
The characteristics that can influence the price of the drill you intend to acquire are the autonomy and the accessories that it comes with.
The Makita HP457DWE comes with 2 rechargeable 18-watt Lithium Ion batteries so you can get your DIY work done without worrying too much about leaving the job midway. In addition, it includes a battery charger with a power of 18 watts so that you can charge one while you are using the other. However, you have to keep in mind that you will have to leave it charging for approximately 60 minutes so that you can enjoy a full charge.
Another aspect that should be noted is that the battery charger has a charge indicator that will show you the autonomy time of the one you are charging. Likewise, the charge duration of the drill will depend on the use you give it, since some users comment that they have used the equipment and have screwed more than 100 times in wood and concrete and it still had a charge, so you can have an average for the different jobs you plan to do.
Additionally, this hammer drill comes with a high-quality resistant plastic case with a clip closure system, which will allow you to store it neatly and will prevent any heavy object that falls on it from affecting the operation of its motor; as well as you can take it with you in a very practical way when you go to work outside the home, since it has an ergonomic handle for you to hold it.
On the other hand, it has a chuck so you can store the pieces without having to worry about them getting lost. In addition, it will also facilitate the exchange of these, since the hammer has an easy turning system that will allow you to make the respective change with just one hand.
