The best circular saw
Circular saw – Opinions, Analysis and Comparison in 2022
Circular saws are capable of cutting all kinds of materials, making them highly functional for DIY lovers and professionals in certain areas. However, it can be a bit difficult to find the right saw among the variety that the market offers, for this reason, we will describe some of the most outstanding. The Einhell TC-TS 2025 U has a power of 1800 W and has a hard metal blade, suitable for greater precision. On the other hand, the Ginour TPK-PT001 offers a depth of up to 65 mm and has a laser guide for a more exact cut.
The best circular saws on the market
Circular saws have gained popularity among hobbyists and workshop owners, as they are power tools that make cutting tasks easier and faster. However, it is necessary to know the functions of each one to select the most convenient one, so we have made a list of some of the best circular saws of 2022.
circular table saw
Einhell TC-TS 2025 U
This table circular saw has a speed of 5000 rpm and has a power of 1800 W, so it is capable of making a fast and clean cut, suitable for detailers who need precision in projects. It also has a chip suction system and a casing with a dust extractor to contain the waste.
The blade has 24 teeth made of high-resistance metal, which allow cutting fiber boards, oak, firewood and any type of solid material. Additionally, it can be tilted at 0°, 45° and 90°, providing up to 85mm maximum depth of cut.
It is considered by many as the best circular saw, since it has a length of 719 mm with a width of 559 mm and a height of 333 mm, it also provides a work space of 640 x 487 mm, enough to place long and thick pieces. As if that were not enough, the table has a metallized and anodized surface for a better sliding of the materials.
This model could be the one if you want the best circular saw of the moment. However, it is important to review some of its most important features before making the purchase:
Pros
Power: It offers a power of 1800 W and 5000 rpm, which allows it to make cuts in solid and highly resistant materials.
Inclination: The inclination of the cut can be adjusted between 0° and 90°, to make longitudinal, exact and angled cuts.
Blade: The blade is made of high quality hard metal and has 24 teeth.
Cleaning: It offers a protector with a system to suck up chips and the casing has an adapter to extract dust, in this way you will keep your workspace clean.
Cons
Guide: Some users indicate that the side guide could be looser than expected, which requires more concentration to achieve accurate cuts.
Scheppach HS100S
This is a bench circular saw, which offers a powerful 2000 W motor, in addition, it is capable of 5000 rpm, making it suitable for cutting wood in the shortest possible time.
The blade is made with a carbide tip, a resistant material very similar to steel, which is commonly used in precision tools. On the other hand, the disc has 24 teeth for greater functionality and a diameter of 250 mm. For this reason, it is possible to reach a depth of up to 85 mm on the surface of the material. Likewise, it is important to know that the blade can be tilted according to the cutting needs.
On the other hand, the complete table has dimensions of 1100 mm high, 880 mm wide and 940 mm long, which allow long and large pieces to be placed. In addition, it has a weight of 22.15 kg, which provides greater stability during use.
For people who want to buy a complete and functional circular saw, this table could be the model of choice. However, it is necessary to know its most outstanding aspects before making a decision:
Pros
Motor: The motor can reach a speed of up to 5000 rpm and has 2000 W of power. For this reason, the table is suitable for quick projects.
Blade: The blade has 24 teeth, 2.6mm width and 250mm diameter, making it capable of cutting up to 85mm deep.
Dimensions: The total width of the table is 880 mm and its height is 1100 mm, so you can cut medium and large pieces.
Practicality: The disc is very easy to change, so you save time for more efficient work.
Cons
Resistance: According to the opinion of some users, the equipment does not provide enough resistance to withstand continuous work, so they recommend it for home use.
hand circular saw
Ginour TPK-PT001
This Ginour handheld circular saw is one of the cheapest and has an innovative laser guide on the top front, specifically designed to make the cut more precise, straight and professional quality. In addition, it has 4700 rpm and 1500 W of power, which provides a clean and fast cut.
On the other hand, it includes two types of blades to place on the saw according to your needs. The 24T is suitable for use on solid wood, while the 40T is intended for soft metal and plywood, however it is also capable of cutting pipe, bamboo and aluminum alloys.
It is important to know that both blades have a diameter of 185 mm and can be placed at 45° and 90° inclination, in this way you can achieve cuts of 65 mm depth. As if that were not enough, it includes a double switch and a protection cover, to provide safety and confidence during work.
For those looking for a functional tool at an affordable price, this circular saw is considered by many to be one of the cheapest. Therefore, we detail its most important characteristics:
Pros
Cleaning: It has a dust blower to keep the workspace and the cutting line clean.
Security: Provides a double switch to lock the saw, in this way you will feel safer during use. In addition, it offers a protective cover.
Accessories: It has two blades, one with 24 and the other with 40 teeth. In addition, it includes a user manual, hex key, two AAA batteries and a guide.
Design: It has a robust and large design. However, it is a light saw and its handle is ergonomic.
Cons
Laser: A user comments that the laser could be a bit imprecise. However, it is necessary to consider that it is not a fixed guide, so the projection depends on the user’s movement.
mini circular saw
TECCPO TAPS22P
It is a light device with compact dimensions, weighing only 2.56 kg and measuring 42 x 14.8 x 11.2 cm, which means that it is suitable for carrying everywhere and holding comfortably for a long time.
Despite its size, this is a powerful mini circular saw that delivers a high level of quality, offering cutting options and having a laser guide. Likewise, it has a motor made up of pure copper wire, which translates into greater performance.
One of the main features of this model is that it has 3 blades to use on various materials. The 24T blade is suitable for cutting 27mm wood, while the 44T blade is intended for cutting 3mm plastic and soft metals. However, the most outstanding blade has been made of grit and diamond, which makes it suitable for cutting ceramic tiles up to 8 mm, as in the case of tiles.
For professionals in the DIY area who are looking for a tool capable of complementing their talent, we recommend carefully reviewing the pros and cons of this circular saw before making a decision:
Pros
Blades: The kit includes a 24T blade, a 44T blade, as well as a unique diamond and grit disc, to use depending on the project and materials.
Practicality: It is a mini-type circular saw, so it is compact and lightweight, which makes it suitable for carrying everywhere.
Safety: It has a power switch and a protected trigger, in this way, the device prevents accidental starts.
Cons
Power: Its power is only 480 W, which is little compared to other products on the list. However, this is because it is a traveler type model.
Bosch circular saw
Bosch PKS66AF
This is a Bosch circular saw, with a power of 1600 W, in addition, its motor is capable of reaching up to 5000 rpm, which makes it one of the fastest of its kind. It also has a 190mm diameter carbide blade and includes a quick reach lever, designed to modify and set the desired height of cut, providing up to 66mm of depth on wooden surfaces.
It offers a portable design that is easy and comfortable to use, since its handle is ergonomic and has an anti-vibration and non-slip coating, thus giving the user total control of movements.
Also, it includes a button with lock that prevents accidental activation of the saw and has the Softstart function, designed to avoid sudden starting, which could affect our joints.
For those individuals who prefer quality products, the Bosch PKS 66 AF has the best brand of circular saws, according to some users, which is why we recommend reviewing its highlights in detail:
Pros
Precision: It has 3 sections of guide rails to promote precision in cutting.
Power: It has 1600 W of power and 5000 rpm, enough to cut wood easily and quickly.
Design: It offers an ergonomic handle with safety buttons and, as if that were not enough, it is covered with anti-vibration and non-slip rubber.
Cons
Blade: The blade might not work properly for professional work as it is of standard quality according to some users’ opinion.
Makita circular saw
Makita 5008MG
It is a practical and light tool, thanks to the fact that the casing and the base are made of magnesium. In addition, its handle has a non-slip system and the levers are covered with rubber, which provides a more comfortable grip and greater control of movements.
On the other hand, its blade has a tilting capacity of 0°, 22.5°, 45° and 50°, which gives you different positions to make multiple types of cuts. Also, this Makita circular saw is capable of drilling to a depth of 75.5 mm and has an Allen screw, suitable for safely changing the blade.
For those who are wondering which is the best circular saw, it is necessary to know that this model can reach a speed of up to 5200 rpm, enough to carry out work in the shortest possible time. In addition, it has an exact calibration system and the ability to create a small blast of air, thus cleaning the work surface and improving visibility.
DIY professionals need a machine with characteristics according to their skills, so below we detail the pros and cons of this model:
Pros
Function: It offers a depth of cut of 75.5 mm, much more than other models on the list. In addition, it has four tilt positions, at 0, 22.5, 45 and 50°.
Design: It has a robust structure that favors good stability. In addition, it has an ergonomic non-slip handle to improve grip.
Power: Its power is 1800 W, which allows it to reach speeds of up to 5200 rpm.
Cons
Guide: This model does not offer any type of laser or adapter for the guide lines, which means an additional expense if you need greater precision in the cut.
circular saw for wood
Bosch PKS 40
It is the best value for money circular saw, according to some users, it does not cost much money anymore and it has a portable and compact design, suitable for traveling. In this sense, its dimensions are 31.3 x 22.7 x 21.8 cm and it weighs only 2.6 kg, which makes it one of the lightest of its kind.
On the other hand, this cheap circular saw allows you to make precise cuts without much effort, thanks to the fact that its structure has a 135 x 260 mm guide plate and has the Softgrip anti-vibration system. In addition, its handle has a non-slip coating, thus providing a secure hold.
For added protection, it also includes a screw to quickly change the blade, as well as a lock that prevents inadvertent activation of the equipment. On the other hand, it is important to know that this circular saw for wood can make 40 mm deep cuts, as well as precise angled cuts.
For those who are still wondering which circular saw to buy, the Bosch PKS 40 could be the right choice. However, you should take into account its pros and cons before purchasing the product:
Pros
Design: It has a small, portable, light and easy to control design. In addition, it offers a guide plate for greater precision.
Blade: Its blade is 130 mm in diameter and can be adjusted to make angled cuts with great precision.
Handle: Provides the Softgrip system with anti-vibration coating and non-slip rubber.
Cons
Depth : Offers a cut of only 40mm depth, which could limit its use in some DIY projects.
Einhell circular saw
Einhell TC-CS 1400
It is a powerful tool for all hobbyists of craft projects, as it has 1400W of power and is capable of cutting at 5200rpm, which is enough to use on different types of wood.
It offers a cutting depth of up to 66 mm at 90°, in addition, its hard metal blade has 24 teeth and a 190 mm diameter, which allows it to make longitudinal and transversal cuts, depending on the work needs.
The base of the Einhell circular saw has been galvanized to prevent rust, so it is able to protect its iron structure and provide greater durability. In addition, it provides optimal and safe working conditions, thanks to its functions to suck up dust and start smoothly. On the other hand, its handle is ergonomic, so you can hold it comfortably, allowing you to maintain control at all times.
For those looking for a powerful circular saw that works well in DIY projects, this tool could meet expectations, so it is convenient to detail its most important aspects:
Pros
Motor: It offers 5200 rpm and has 1400 W of power. In addition, it has a soft start function for added safety.
Blade: Its disc has a diameter of 190 mm, 24 teeth and can make cuts at a depth of 66 mm with a 90° inclination.
Materials: The iron base has been galvanized to protect against rust, in addition, the blade is made of hard metal to extend its useful life.
Cons
Guide: According to the opinion of some users, the saw does not provide the best precision, since the guide axis could have a little play.
Circular Saw Accessories
circular saw table
Wolfcraft MASTER cut 1500
It is a multifunctional table that can be used to cut or mill, thanks to its adjustable aluminum plate to place the cutting machine. For this reason, it offers a high level of precision and easy adjustment of said tool.
It has a base with crossbars, to provide stability and greater sliding capacity. In addition, its design is quick folding, so it is possible to save space when not in use.
It is important to highlight the compatibility of this circular saw table, since it can be used with the most popular models among handicraft enthusiasts, whether they use jigsaws or router bits.
Guide for circular saw
Wolfcraft FKS 115
This tool is designed to achieve precise, clean, oblique and long cuts. In this sense, it is necessary to know that the base piece to be attached to the machine is made of rubber, which prevents deviations and provides greater firmness in movements.
For this reason, it can be used to guide door cuts, kitchen countertops, among others. Also, it is highly functional for use in areas far from the edge of the piece and for making angular cuts.
In addition, this circular saw guide features a quick-install design, which only requires you to position the tool on the bottom non-slip base using the two clips included in the package.
circular saw blade
Silverline 244964
It is a circular saw blade made with tungsten carbide, which is a compound of carbon and tungsten, characterized mainly by its high hardness level, which is why it is used to create machines that modify steel. For this reason, it is a disc that offers a long useful life and resistance to various materials.
Its design has 80 teeth divided into four sections of 20 teeth each, which allows it to cut plywood, chipboard, cellular concrete, plaster, solid wood, among others.
On the other hand, it has a total diameter of 250 mm and its hole for fixing to the saw is 30 mm in diameter, however, it can be reduced with a ring to 16, 20 and 25 mm in diameter.
Guide to buying circular saws
Circular saws are highly functional tools for all kinds of DIY tasks, however, their use must be clearly understood, since some are designed to make specific cuts with a larger work force. Therefore, we have prepared a guide to buying the best circular saw, with the necessary information to make a good decision.
Shopping guide
Design
When making a comparison of circular saws, we know that one of the most important aspects is its design, since some could have more robust structures compared to others, which could also define how much it costs. The design goes according to the utility of each saw and its resistance, comfort and versatility depend on it.
In this sense, if we plan to use one of these tools for strong and continuous work, a table saw, also called a bench saw, is recommended, which has a thick structure that provides greater resistance and supports materials of large pieces. While if we need versatility and freedom of movement, a hand saw could be the one, due to its comfortable grip design and the possibility of making angled cuts, which would not be possible on a table saw.
With regard to comfort, it is recommended that the chosen saw offer an ergonomic handle so that it is not exhausting during use. In this sense, some offer a rubber coating for a firmer hold, in addition, this prevents involuntary slipping that could cause accidents. Likewise, we find those that have an anti-vibration system, which generally have a thick design handle, so they do not cause pain in the wrist or arm even if used for a long time.
In the same way, the weight of the equipment must be considered, since the table saws could have a weight of approximately 20 kg, in this way they can provide enough stability. On the contrary, portable saws should be light, weighing between 2.5 and 5 kg so as not to cause fatigue.
Sheet
The blade or knife is the main element of the circular saw, since the depth of the cut, as well as the angulation and resistance to different types of materials depend on its quality and characteristics. In addition, this influences the price, therefore, it could tell us if it is a good and economical tool.
In this sense, the depth that the blade can reach is between 40 and 85 mm, this depends on the inclination it has on the material. For this reason, it is important to know that the angles can be between 0 and 90° and can be adjusted at the base of the equipment. Likewise, it is possible to find leaves that are between 130 and 250 mm in diameter. but keep in mind that not all blades are suitable for all saws, as the entry hole could have different diameters.
The edges of the blades are made up of teeth, which are what define how clean the cut will be. Therefore, standard grade blades have 24 teeth, abbreviated as 24T, but 20, 40, 44 and 80 tooth blades are also available.
For resistance problems, it is recommended that the blade be made of hard metal or tungsten carbide, which allow you to cut solid wood, aluminum derivatives, among others. Also, there is the blade made with diamond and grit that is intended to be used on ceramic pieces.
Power
The effectiveness of the equipment depends on the power, since some materials may require more effort to cut than others. In this sense, we can find equipment with a power that goes between 1400 and 2000 W. Some are suitable for occasional use in domestic work and light materials, while the others are recommended for all those who have a workshop and need to use equipment constantly on hard materials.
Also, how quickly a saw needs to be completed depends on the motor’s ability to spin the saw blade, which is defined as revolutions per minute. The equipment usually has between 4700 and 5200 rpm, where the first ones are enough to cut tubes and aluminum alloys, while the speed of 5200 rpm is designed to cut solid wood and other very hard materials.
Guide
All saw models include some standard quality guides, which work well for beginners in the area. However, when these guides are not enough, it is possible to purchase others of greater length and stability, which can be assembled to the original design of your saw and allow you to make cleaner cuts.
There are also models that include front laser light, which work through batteries and project a tracing light on the work surface. However, these guides depend on the stability of the user, so they could be a little less precise than the manual type.
Frequently asked questions
Q1: How to use a circular saw?
The first thing you must define before using a circular saw is the type of material you want to cut, in order to choose the right blade. As a general rule, blades with more teeth are used for cutting lighter materials such as soft and fine woods, while blades with fewer teeth are used for cutting harder and thicker materials. A common mistake made by some beginners is to cut aluminum with a wood blade or vice versa, for this reason we recommend having several blades of different material and thickness. The most common are steel, carbide or diamond.
Q2: How to make a guide for circular saw?
Circular saws usually include a fence for more accurate cuts. Some models have a laser light that also serves to maintain a straight direction while you make the cut. However, some users find these methods insufficient, especially when trying to cut long pieces, such as sheets of aluminum, plastic or wood. If this is your case, then you could use the material itself to make a higher capacity guide.
The idea is to cut a strip of about 5 cm that will work as a ruler or guide. Afterwards, you only have to mark the desired measurements on the material and you can use tweezers to fix your guide piece, in this way the cut will be more precise.
Q3: How to sharpen a circular saw blade?
There are at least three ways to sharpen circular saw blades. The first is taking the blade to a specialized place, either from the manufacturer of the discs or the saw, but this can represent a significant expense of money. Another way to do this is by using a specially designed machine, however it could be more expensive than the saw itself, so some people have devised an alternative, using the grinder to sharpen the disc.
In this case, you must fix the grinder on a straight surface, taking care that the cut has the same angle as the edge of your saw. The saw blade must also be fixed to a piece of wood, you can do this with screws, and then turn on the grinder and bring each tooth of the saw blade closer, sharpening very carefully so as not to generate the opposite effect.
Q4: How to disassemble a circular saw?
This is a procedure that is recommended for specialized technicians, since we run the risk of damaging the saw, but if you have some knowledge and want to apply it, it is advisable to first go to the user manual, since it generally contains the instructions for assembling and disassembling machine. Remember to unplug the device before trying to take it apart.
Q5: How to install a circular saw on a bench?
You will need a wooden table that you do not use, since you are going to open a hole in its surface, where you will place the handsaw. The first step is to make a cutout with the measurements of the saw and place some wooden slats under the table that protrude at least two centimeters from this area, this will be the stop to support the weight of the saw.
Next, you must cut a piece of plywood with the exact measurements of the fretwork you have made. On this wood you are going to place the base of the circular saw to mark the measurements and make a medium draft with the router, so that the saw is just right and does not move. At this point, you must fix very well with screws and nuts for greater security. You can then turn on the saw to create the slot in the table where the disc will come out. Finally, you must take out the wood in which you have fixed the saw and turn it over, so that the blade is on the surface of the bench and the device under the table.
