The best circular table saws

Circular Table Saw – Buying Guide, Opinions and Analysis

Circular table saws are useful tools for all types of woodworking, with maximum precision and adequate cutting quality. Something for which it is necessary to adjust the product to the type of material you are working with and its dimensions. In this sense, the more versatile the machine, the better results you can obtain. Among the most outstanding is the Bosch GTS 10 XC, which is capable of maintaining a constant speed and has a 2100 W motor for high performance. In addition, it incorporates soft start for greater security. If you are looking for something tighter, you can bet on the Proxxon Ks-230 model, specially designed to work with all kinds of small pieces, whether wood or methacrylate, to obtain high-quality angled cuts and be able to carry out all the small jobs you need.

Buying Guide – What is the best circular table saw on the market?

To make your carpentry work easier and more comfortable, it is advisable to have the right tools, both for the size of your workshop and the type of work you are going to do. In order for you to get the most out of your investment, we recommend that you consult the advice in our guide to buying the best circular table saw, where we tell you what you should consider during that purchase process.


Since not all materials are equally hard or resistant, power is a fundamental element in the purchase of a circular table saw. This power is what establishes the available speed at which we are going to be able to work, as well as the size and types of materials on which we are going to be able to cut.

As a general rule, this power must be at least 1000 watts, also incorporating a speed regulator that allows us to reduce it to be able to adjust it to the type of material used. Remember that materials such as plastic or acrylic require lower speeds to avoid cracks in the material.

On the other hand, the depth of the setting or cutting is also key in terms of power. If the power is not enough, the stall level and material width will also be limited. Keep this in mind when choosing.


In a comparison of table saws we cannot forget about the second part of the table. This table is the one that supports the saw, so we must check that it guarantees adequate resistance and support for our work.

Specifically, this table must be made of stainless steel or another high-resistance material, which guarantees the adequate capacity to withstand the efforts of the work. It is also necessary that this table is stable, with resistant rubber supports or similar elements that help it not to move or slide during cutting sessions.

On the other hand, it is a good idea to verify that the saw table is easy to assemble and secure, thus helping you to be able to start work sooner, with the total certainty that your operations will not be affected by the assembly of the saw. All these aspects must be ahead, including how much the saw costs, so that the purchase is perfect.

cutting accessories

The table saw is an element that includes various components that facilitate your work. One of them are the systems that allow the saw to be turned to the desired angle, so that you can make miter cuts to the desired size.

You should also look for elements in your saw that allow you to orient and guide the wood or cutting material, so that you can lean on them for best results. If you also have extensions or additional supports to the table, which allow you to place the material as you cut it, much better.

As a last element, we do not forget the blade protection systems, which prevent accidents by preventing hands from coming into contact with the blade. This element also usually includes a system to suck up the cutting dust by simply connecting a vacuum cleaner. The more of these elements that are included in your table saw, even if it is not as cheap, the better.

The 5 Best Circular Table Saws – Opinions 2022

When you are looking for a circular table saw, we are talking about an investment of such caliber that it is worth looking well and comparing the different options so that your purchase is a success. With the selection that we offer you, you will have five products that you can use as a reference, as well as to find a quality product at an adjusted price that guarantees the best results.

1. Bosch Professional Circular Table Saw GTS 10 XC

This model has a motor that provides an absorbed power of 2100 W, to reach a no-load speed of 3200 rpm. In addition, it offers the Constant Speed ​​function, which regulates the speed to keep it constant regardless of the load, thus generating more professional results in simple and complex projects.

The work table is extendable, so you can adapt it to the space and needs of the project. Also, it incorporates a sliding carriage that allows exact cuts to be made with practicality. In this regard, it is worth mentioning that it is made with high-quality guides that are not easily damaged. It also has a retractable cutting wedge to make hidden cuts quickly and easily. 

For added durability, this saw features an overload protection system as well as a soft start that increases lifespan and prevents the site’s electrical protection from tripping when the machine is turned on. 

This could be the best circular table saw if we take into account the comments of many users. For this reason, we invite you to thoroughly review some of its main features.


Speed: It can reach a maximum idle speed of 3200 rpm, so it can quickly cut through different types of wood. In addition, it has Constant Speed ​​technology to maintain a constant speed.

Rails: The slider carriage includes high-quality rails, which are not only durable, but allow for quick and easy work when making precision cuts.

Safety: It has a soft start that avoids the initial impact on the electrical current network when turning on the machine. In addition, it incorporates overload protection for greater safety. 


Clearance: It is possible that the sliding carriage has a certain clearance from the factory. However, you can fix this problem easily and without professional technical help.

See this product on Amazon

2. Proxxon 2227006 Bench Circular Saw Ks-230

Within the best circular table saws of 2022 there is also room for compact models such as the Proxxon Ks-230. If you don’t have great cutting needs or you are going to work with small pieces, this model is perfect for you.

It has a nominal power of 85 watts that nevertheless offers a speed of rotation of 5000 revolutions per minute. A speed that allows you to cut small pieces of wood and boards, pieces of methacrylate, plastic and other materials.

To obtain more precise cuts, it has an angle protractor, to cut miter at any inclination, as well as a ruler or horizontal adapter with which to adjust the size of the desired cut for pieces.

All this in a product with one horsepower, a relatively light weight of just 10 kilos and a tabletop design that offers considerable stability during use.

If you need to do small carpentry and marquetry work, the Proxxon 2227006 circular table saw is an excellent company. A saw that allows you to work with all kinds of materials such as wood or methacrylate, in a simple way and without missing anything from the large tables for large jobs.


Light: for the small jobs you need you can take it with you thanks to its adjusted weight.

Rulers: includes a ruler to adjust the rotation of the machine and its measurement, as well as the angle of rotation.

High speed – The saw can rotate at 5000 revolutions per minute for more effective cutting.


Use: since we are talking about a small-sized saw, its use is reduced to some very specific small-sized jobs.

Regulator: the saw does not have a power regulator to adjust it to the hardness of the material.

See this product on Amazon

3. Einhell TC-TS 2025 U Electric cutting table with cable and bench

The Einhell TC-TS 2025/1 U table saw is an integral model, with which we will have both the saw and the table support for it. This saw has a power of 2,000 watts, with a cutting height for materials up to 85 millimeters thick. Cuts that we can make both straight and at angles of up to 45 degrees, depending on what we need.

This saw has an integrated chip suction system, prepared only to connect the vacuum cleaner, as well as a blade protector that helps us work safely. All this in a model with an anodized finish that helps an efficient sliding and an adequate durability of the product.

Something that is also helped by the pusher and the different support elements for planks and larger pieces, also integrated into the body of the saw.

Get quality cuts with this table saw, whose main functions we analyze below.


Power: Its 2,000 watts of power make it easy to cut all kinds of materials with adequate performance and finish.

Table included: This model includes the table, or rather the legs, to install the saw safely and avoid problems with improper anchoring and other inconveniences.

Security: The saw includes different security measures, such as the overload switch or the protector for the cutting blade.


Mobility: Due to the characteristics of the table, we are not talking about a mobile model that we can easily transport, but about a fixed design for the workshop.

Noise: The noise level generated by the saw is higher than would be desirable or than what other models generate, according to users.

See this product on Amazon

4. Peugeot EnergySaw 254 B Circular table saw

This is one of the cheapest table saws in this selection, and yet it has everything you need for optimal finishes when cutting thin pieces of wood, especially parquet, as it offers 1200W of power. In addition, this model stands out for its integrated vacuum cleaner, which reduces the amount of dust in the workshop.

The work table has two extensions on the sides that provide better support for cutting longer pieces. Similarly, it includes two presses to facilitate clamping and provide more precise cuts. In this sense, it is good to know that it has a triple safety handle to offer a good grip and avoid accidents. 

Allows bevel cutting at an angle of up to 45° to the right. As if that were not enough, it includes a 4 m power cable so you do not have to use an extension. It can also be easily rolled up on one side for easy equipment storage. 

If you want a circular table saw to build hardwood floors, this may be a good option. However, it is advisable to review in more detail the pros and cons of the product before making the purchase. 


Suction: The built-in suction system absorbs up to 95% of the dust generated when cutting parquet. In this way, it is possible to enjoy a clean working environment and subsequent easier maintenance.

Extensions: It comes with extensions on the sides that can be easily removed to increase the work surface.

Cable: Comes with a 4 m long cable, so in most workshops it is not necessary to use an extension. Similarly, it is possible to roll it up on one of the sides when storing the tool. 


Disk: Although the included disk is very precise, it is necessary to point out that it does not support heavy work, so it is advisable to buy an additional one.

See this product on Amazon

5. Zipper FKS 250 Circular Table Saw

Although it is not a well-known manufacturer, the quality of the Zipper ZI-FKS250 table saw makes it worthy of closing this list. This table saw has a power of 2,200 watts and a turning speed of 4,800 revolutions per minute.

The sash can be rotated up to 45 degrees and includes a suction tube at the top to keep the environment free of dust. Its cutting height reaches 70 millimeters and includes two supports, one on the side and the other on the front, for when you need to work with large boards.

All this in a quality product that is presented on a firm support table that guarantees the stability of the whole while you work. Its aluminum construction is resistant to indoor and outdoor use, bringing cutting power wherever you need it.

Although the ZI-FKS250 saw does not stand out among the cheapest models of circular table saws, it is true that compared to products with similar features, it offers a cheaper price. As an example it has a high table and a high power of 2200 watts. Its design is strong and resistant and guarantees proper use for all types of materials.


High power: its motor can rotate up to 4,700 revolutions per minute, with a power of 2,200 watts.

Guides: Includes longitudinal and transverse guides, which help to obtain more precise and easier cutting results.

Suction mouth: includes a suction mouth with which to keep the environment free of dust and sawdust by connecting a vacuum cleaner.


Regulator: it does not have a speed regulator, so the power may be excessive with some fine or more delicate materials.

Wiring: the electrical cable is too simple for this type of product.

See this product on Amazon

How to use a circular table saw

When working with wood, a lot of precision is required to make cuts adjusted to the measurements that are needed. Circular table saws make it easy to do this and other types of quality work, so in this article we are going to tell you how to use it properly and safely.

What you should know before using it

Before using your machine it is very important that you familiarize yourself with its handling, functions and the controls available to operate it. You must know which control to activate to quickly turn off the engine if necessary. The same goes for the space you need to operate around it.

These machines have safety devices; learn what they are for and how to put them into operation.

Wear it with proper protection

To operate a circular table saw it is important that you do so with adequate protection, starting with clothing. This must be adjusted to prevent it from hooking to any part of the machine, especially the saw. Do not wear pendants or chains around your neck or wrists.

Wear safety shoes with anti-slip and anti-perforation soles. The use of protective glasses is essential to prevent residue from the cut wood from entering your eyes.

where to place it

A circular table saw is a powerful machine for making cuts that needs to be located in a suitable place so that you can use it without running any risk. In principle, the surface where you put the machine must be firm; if it is on a table, it should not be uneven. This surface must not be slippery or wet.

The environment of the table must be clear of any type of obstacle. And the cut shape should be oriented downwind.

How to use it

To carry out cutting work with your machine, you must fix the wood that you are going to cut on the table and against the guide rule that will allow you to cut to size. You should stand in front of the machine so that the on/off switch is always within reach.

Hold the wood with your hands on each side of the wood, assuming the same position; never extend your thumbs as they will be in the way of the saw. Remove the disc protector and turn on the machine. Slowly push the wood against the saw and make any necessary cuts. Turn off the machine every time you have to interrupt the cuts.

Maintenance that you must give

A circular table saw has many elements that need to be in good condition for the machine itself to function properly. That is why it is very important that you perform daily maintenance, after each use, to avoid any failure.

For example, the lower and upper shells should be cleaned after each use to prevent wood particles from causing a malfunction. It is also important to check before each use that the saw is properly adjusted. Also change the discs when necessary.

The most popular brands

Each of the tools that we want for our home acquires an important meaning, and as users the greatest demand we have is that it be of quality and last a long time with us. In some way, the manufacturer is a guarantor of the characteristics that the brand offers us. Here you can read the route and importance of the three brands preferred by customers when buying a circular table saw.

This is a German brand created in 1964 by Josef Thannhuber, as a continuation and remodeling of his uncle’s plumbing company. Being just the starting point that would lead them to be one of the main leading brands in terms of products and tools for the home.

Currently, the company has a branch and headquarters located in Landau, Isar, and specializes mainly in the marketing of tools for all those who love DIY and other remodeling on a more professional level. They also offer everything related to portable electro, stationary machines or garden tools.

They have more than 1,400 employees in all the branches they manage around the world and their annual income as a group reaches 486 million euros.

The company’s philosophy is based on providing and offering well-made and quality products. Whichever audience gets the tools, the stability, innovation and design will be the main advantageous features. On the other hand, they try to sell products at attractive prices, following the motto: “You have to keep moving forward, even if the others are already arriving.”

The Bosch brand has been one of the favorites of users, who consider that each of its products helps them to have a much easier and simpler life. This company is one of the oldest in the entire market, because it was created more than 130 years ago in Stuttgart by Robert Bosch, and although at the beginning it was somewhat small, focused on automotive products and industrial technology, after the Great Depression broadened the vision of their company and began to market household appliances.

Currently, they have a completely wide and varied product line. Users have refrigerators or freezers, kitchen robots, washing machines, dishwashers, clothes dryers, electric toothbrushes, vacuum cleaners, microwave ovens, automatic coffee machines and in this case, circular table saws.

Bosch mainly coins an innovative and ecological technology and through its products, always integrates the care and rescue of the environment. In addition, the quality, commitment and effort is reflected in all the brand’s manufacturing materials and products.

On the other hand, we have Makita, a company with more than 100 years of experience that, with the initial idea of ​​selling and repairing electric motors, expanded to become what it is today. Currently, they are based in more than 40 countries and are considered innovators in the manufacture of all their products.

The quality and durability that characterize each product has led them to have more than 10 operating plants.

As an objective and business philosophy, they aim to meet the needs of users, offering power, durability and optimal performance. In addition, they integrate everything necessary for daily life, making products that produce less noise and at the same time have compact designs, so that users have the possibility of carrying and transporting them anywhere.

Makita’s headquarters is located in California, and there they are responsible for producing a large number of products, but also for training their operational staff, strengthening professionalism.

» Review information from previous years

These products used to be among the most recommended, but now they are no longer available

Einhell RT-TS 920

The Einhell RT-TS 920 model is a table saw that, compared to the Bosch model, offers high quality although with a simpler and cheaper design. Its motor offers a power of up to 900 watts with which to cut all kinds of materials, both straight and with a variable inclination of up to 45 degrees.

La altura de trabajo puede ajustarse hasta los 45 milímetros en función del grosor del material utilizado, incluyendo un empujador y un soporte que ayuda a mejorar el corte. Para mantener el entorno de trabajo limpio este producto cuenta con una bocana para conectar un tubo de aspiración con el que poder retirar el polvo sobre la marcha.

Todas estas características junto a su precio ajustado, la convierten en la mejor sierra circular de mesa por calidad precio según la valoran los consumidores.

Aunque no pertenezca a  la mejor marca de sierras circulares de mesa, el modelo Einhell RT-TS 920 es una sierra de alta calidad con un nivel profesional que te garantiza un adecuado funcionamiento y una amplia capacidad de uso. Su mesa de pequeño formato permite poder disponer de esta sierra allí donde lo precises, conservando la potencia y versatilidad de los modelos tradicionales fijos.


Potencia: dispone de una potencia de 900 vatios con las que poder cortar todo tipo de material, duro o blando, desde la madera firme al conglomerado.

Empujador: el empujador con soporte te ayuda a trabajar con piezas de gran tamaño, manteniendo la línea de corte siempre recta.

Conexión para polvo: la sierra cuenta con un tubo que, conectado a una aspiradora, permite aspirar el polvo durante el funcionamiento.


Dureza de las guías: según mencionan algunos usuarios las guías son algo duras de utilizar, especialmente durante los primeros usos.

» Revisa la información de años anteriores

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *