The best Saws of Calar

Jigsaw – Buying Guide, Opinions and Analysis

Among the tools of the advanced handyman we find the jigsaw. This tool is used to create holes, cut planks and adjust the pieces of wood or other material to what your design requires. Obviously, this is possible by betting on saws with high power and with a depth of cut level that adjusts to the type of material used. The more versatile, the better. As the best product of the moment, according to consumers, we find the Bosch PST 900 model, which offers a wide level of draft and cut enhanced by its 600 watts of power, making it perfect for carpentry and plumbing jobs of all kinds. If this product is too much for you, you have a simpler option in the Einhell TC-JS 80 E model., which reaches up to 3000 revolutions per minute with an adjustable cutting depth of up to 8 centimeters.

Buying Guide – What is the best jigsaw on the market?

Those who are fond of DIY and carpentry have in the jigsaw a special tool with which they start many projects. If you are looking for a jigsaw but you don’t know where to start, be sure to consult our guide to buying the best jigsaw, where we offer you all the necessary information so you don’t get lost.


The usual power of a jigsaw ranges from 400 watts to 800 watts. In this type of tool, power is key for two reasons. In the first place, because to cut certain materials of greater hardness or planks of greater width, it is necessary that the power be higher, so that the greater it is, the more possibilities of use it offers you.

On the other hand, power is also key in establishing the operating speed of the jigsaw. Normally, this power has three work levels that vary depending on the materials and that also offer more or less precise results.

For example, the fastest speed, although it is used for all types of materials, it is true that it has a somewhat coarser finish, while other finer products require lower speeds to avoid chipping, although with much finer and more precise results..

Blade mounting

Modern jigsaws have a very simple system for mounting the blade that no longer requires additional tools or other types of accessories to leave the blade properly mounted.

However, it is important that you know that there are two types of sheet or fastening system: the so-called U system and the T system. There are no differences between the two systems beyond that fastening, since there is no system that provide more or less efficiency. However, it is something that you must take into account, especially when buying blades, since if you choose the wrong blades, you will not be able to use them.

In any case, both systems have blades for all types of materials and dimensions, so you won’t have any problems finding a suitable blade either. Of course, the leaves you use must always be in perfect condition, whole and without chipped teeth or cracks, mainly for your own safety.


Jigsaws allow you to perform different operations, although some of them require a certain skill that you can replace with the necessary accessories. An example of these accessories are the cutting guides, which help you keep a straight line when cutting any type of material. Another accessory that helps a lot to keep the work area clean is the dust outlet that, properly connected to a vacuum cleaner, allows you to absorb all the dust generated during the cut in a comfortable and simple way.

Another important accessory is the blade protector, which consists of a plastic piece placed on the front part that prevents placing fingers on it. And finally there are other accessories that make it easier to hold the jigsaw, make certain miter or complex cuts and many other interesting functions. The more accessories included in the kit, as always, the better.

The 5 Best Jigsaws – Opinions 2022

If you are looking for the best jigsaw to carry out various domestic tasks, or as an instrument to carry out carpentry, decoration, crafts, plumbing and any activity that involves cutting a certain material with a high degree of precision and aesthetics, here you are. We show the best jigsaws of 2022, so that you can choose the one that best suits your needs.

1. Bosch PST 900 PEL Jigsaw

main advantage

It has 620 W of power that allows a good depth of cut, in order to give greater precision and a good finish to each of the jobs you do at home with this great tool.

main disadvantage

The most notable disadvantage of this product is that it includes only one cutting blade, so you must purchase spare or special blades separately for other specific cuts.

Verdict: 9.6/10

It is a very complete jigsaw because it has 620 W of power, a long-lasting cutting blade, a guide to follow the indicated cutting line, silent and easy to handle; all this makes it one of the favorites of users.

See this product on Amazon


This BOSCH PST 900 PEL jigsaw has 620 W of power, which is enough to carry out your DIY work in an easy and simple way. You can achieve very precise cuts so that your work at home will be admired by all who enjoy your creations.

The depth of cut on this saw is 90mm in wood, so few if any jobs will be beyond the power of this great Bosch tool.

Its great power allows it to develop between 500 and 3100 revolutions per minute to reach the speed and strength necessary when making the cuts you want in each of the DIY jobs that will serve to improve the appearance of the house without the need for Hire a specialist technician.


It has the Bosch electronic control and a switch button that allows you to select and control the number of strokes so that the operation of the machine adjusts to the type of material that we are cutting and thus achieve the required finish.

It also has the integrated Power Light to keep the cutting line illuminated and thus avoid deviations or unwanted cuts that could damage the piece on which you are working.

It has the Bosch Low Vibration system to avoid high vibration that could damage or hinder the DIY you carry out.

It has an ergonomic softgrip handle so you can work even for very long periods of time without your hands being affected by handling the machine.

Design and dimensions

It has a saw blade designed for long life. You will be able to use this blade for a long time without needing to change it very often.

In its design, it has a 4-level orbital pendulum movement to work faster and make the necessary cut in a curved way so that your work looks like that of a professional. It is possible to change the blade in a safe and effortless way when required by this tool.

This model of jigsaws has a weight of 2.2 Kg so that you can handle it very easily and it will not be a problem if you have to use it for a very long time.

As for the dimensions of this tool, we can point out its 38 x 24 x 11.5 cm which, in addition to its weight, allows you to carry out high-quality work at home or even if you want to take it to the home of a relative or friend who needs your help.

See this product on Amazon

2. Einhell TC-JS 80 Jigsaw

If you are still wondering which is the best jigsaw , you can find a good option in the Einhell TC-JS 80 E, which is designed to cut straight or curved lines while maintaining a good level of precision. This saw can reach about 80 mm deep in wood and 10 mm in other materials such as plastic or steel.

The cut is achieved thanks to its pendular movement, which reduces its duration. It also allows to regulate the speed of the movement according to the material to be cut, from 800 to 3000 revolutions per minute.

The handle made of plastic and configured in a soft grip, guarantees safe and vibration-free handling. Additionally, a vacuum system can be installed, which works like a simple vacuum cleaner, to keep the workspace clean.

To facilitate cutting tasks, its metal base can be adjusted in four positions, either to the left or right, up to 45 degrees, with the aim of being a saw adaptable to each task.

Even though the best jigsaw brand depends on the demands and requirements of each user, it never hurts to give this Einhell brand model a try, the TC-JS 80 E, whose pros and cons we list below:


Adjustable speed: This saw has an electronic speed control, easily adjustable to the material on which it is going to work to obtain better results, being able to choose between a minimum of 800 to 3000 revolutions per minute.

Power: With a power of 600 watts, this saw is capable of making straight, curved and miter cuts up to 45 degrees to the left or right in wooden boards with a thickness of 80 millimeters, and plastic or steel planks with a maximum of 10 millimeters thick.

Dimensions: This saw has a weight of only 2.1 kilograms, along with physical measurements of 23 x 26 x 7.1 centimeters, which is why it is easy to transport, store and can even be carried in a toolbox. Blades are easy to remove and change safely without the need for additional tools.


Limited use: The use of this saw may be limited to simple domestic repairs, its power and design are not recommended for forced or very demanding work, because it could be easily damaged.

See this product on Amazon

3. Bosch Home and Garden 0.603.3A0.300 Compact

If you are a fan of DIY tasks or you like construction in general, it is almost certain that you could need an excellent jigsaw for those jobs that require precise and clean cuts.

The choice between jigsaws offered by Bosch with its PST 1000 PEL model offers you a wide range of advantages that you can use to get the most out of it.

In order to offer you excellent precision, this model has an electronic control that will help you maintain the shape of the cuts as well as the number of strokes by means of a button.

It also has a special wheel so you can start the cut smoothly and easily and this will help you use your jigsaw on practically any type of material.

Also, because this equipment is used to make precise cuts, the Bosch PST 1000 PEL has a system called Cut Control which, combined with the Power Light, offers you excellent visibility of the blade to be able to maintain the most precise lines. and complicated. And thanks to its robust body, you can hold it firmly and safely in your work and tasks.


Technology: among the most outstanding advantages offered by the Bosch PST 1000 PEL jigsaw we have a wide selection of incorporated technologies, among which you will find the Cut Control to modulate the cuts, the Power Light to improve visibility and the SDS so that You can operate the saw with one hand.

Power: When we talk about this type of equipment, power is a key aspect. This model works with a total of 650 watts of power, which is more than enough for the DIY and construction tasks you need.

Design: likewise, this equipment stands out for presenting a robust appearance and truly excellent finishes, characteristic of the renowned Bosch brand.

Movement: it also has a four-level orbital pendulum movement system that will allow you to control the progress of the sawing of the blade so that you can comfortably work any type of cut.

Dimensions: it has dimensions of 38.5 x 34.5 x 11 centimeters and a weight of 2.3 kilograms, making it a compact and lightweight device that you can use without exhausting yourself in the process.

See this product on Amazon

4. Bosch PST 650 Jigsaw 230V

Another saw in the Bosch family, but with a more compact size, is the Bosch PST 650, ideal for making shallower cuts but with a high degree of precision, either in a straight or curved direction. It reaches a depth of 65 mm in wood and is easy to handle, even in high-density materials.

It includes a special function of air blowing, to clear the work area and keep the cutting line free at all times. The saw has been assembled on a wide metal plate, to provide stability and safety when working.

To reduce vibration, a special linear mass compensation system was added, supported by an ergonomic handle, so that it can also be used with one hand. Regarding the change of the saw blade, a very simple mechanism was created, which allows the blade to be replaced in just seconds.

If what you want is to acquire the best jigsaw for 50 euros, then you should take a look at the pros and cons of the Bosch PST 650, since it could be what you are looking for:


Power: This saw is ideal for heavy carpentry work because it has a power of 500 watts, being able to cut with a depth of up to 65 millimeters in wood, and 4 millimeters in steel.

Vibration: One of the advantages of this model is that it uses the Low Vibration system for safe and consistent work that prevents it from vibrating excessively and your arm from feeling fatigued during the activity. In addition, thanks to its handle with anti-vibration Softgrip function, discomfort and instability are avoided.

Blower: Similar to the previous model, this version has an air blower (requires additional connection) to keep the work area clean and clear, avoiding errors and obstacles when cutting.

Accessories: It includes a saw blade for wood and a case to transport it more comfortably, especially considering that it weighs only 1.6 kilograms, being able to protect it in the same way against bumps or damage.


Number of blades to cut: Some users comment that this saw only includes a blade to cut wood, for which it is necessary to buy an additional set of blades to cut materials such as metal, among others.

See this product on Amazon

5. Black+Decker KS501-QS 400W Scroll Saw

It has a power of 400 W with which you can carry out different jobs and repairs in your home. In addition, it has an ergonomic handle that will allow you to hold the tool easily and safely.

In addition to this, it is a jigsaw with a low vibration level, to avoid fatigue when working with it during long hours at home or in the workshop, it even has a dust blower, so that the work area is always clean. it will be clean

On the other hand, it has a 3-meter power cable, so that, if the plug is a little removed, you can use the saw comfortably. However, we advise you to be careful if you have to move inside the workshop or work area, since you could get entangled with the cable, especially if the space is small.

If you do not know which jigsaw to buy, perhaps this model is the right one, as it has various aspects that can meet the needs of users. In this section we will show you its main qualities.


Safety: This power tool has an ergonomic handle that provides safety and precision while you make cuts.

Versatility: It is a versatile saw, because with it you can cut wood, aluminum or steel with depths of 65 mm, 10 mm or 5 mm.

Price: It has an affordable price so many people can buy it to do DIY tasks or work in a workshop.


Storage: The jigsaw does not come with a holster or storage case for storage and transport.

Guide: It does not have a lateral guide, which is used to make straight parallel cuts.

See this product on Amazon

Bosch PST 900 PEL Jigsaw

It is one of the most complete saws to carry out DIY tasks, cataloged by some clients as the best Bosch jigsaw.

This instrument is designed to cut with the necessary degree of precision, depending on the type of material, since it has an adjustment wheel, which gives you the possibility of preselecting the frequency of the blade movement by means of a switching button, reaching a depth of 90 mm in wood.

It also includes a simple lighting system to maintain visibility during the cut, so you never lose the cut line as the cut gets deeper. The saw is made to be used with one hand, reducing the number of vibrations with an ergonomic handle.

The cut made with the Bosch PST 900 is exact, thanks to its four-level pendulum movement, which allows the cut to be made in less time and guarantees a longer useful life for the saw blade.

If you are looking for the best jigsaw of the moment, this Bosch model could be the option you require. Here are more details:


Precision: This jigsaw is considered one of the best when it comes to precision. It has an electronic control that allows the number of revolutions to be preselected, being able to choose between a minimum of 500 and a maximum of 3,100 rpm, through a switch button and an integrated adjustment wheel. Thanks to this, it offers a soft start and greater cutting precision, adjusting to the type of material with which it is working.

Functions: With the CutControl peephole and the PowerLight lighting system integrated in this saw, you will have a clear and illuminated image of the cutting line, in order to follow it correctly and thus achieve clean cuts.

Power: With a power of 620 watts, this saw is capable of reaching up to 90 millimeters deep when cutting wood and up to 8 millimeters in steel, working properly in carpentry and plumbing jobs, as well as in other types of jobs.

Stability: Another advantage of this saw is that it has the Low Vibration system with linear mass compensation, and can even be controlled with one hand, and with the other you can handle the material you are cutting. In addition, due to its ergonomically designed handle with Softgrip function, the amount of vibrations when using it decreases, increasing its stability and cutting accuracy.

Lifespan: Features a four-level pendulum motion designed to better conform to curves and speed up the cutting process, protecting the saw blade and ensuring longer life.

See this product on Amazon

How to use a jigsaw

Jigsaws are based on a blade with special teeth that moves perpendicularly with a back and forth motion; There are even some models that can cut at specific angles. They are usually used to make cuts and designs on wood, PVC, leather, aluminum, among other materials. We could say that its use can become much more artistic and free compared to common saws that only make straight cuts.


There are basically two main types of jigsaws: the traditional hand-held ones and the modern electric ones. In the case of the traditional ones, they are usually hand tools made up of a knob that is attached to a thin sheet that allowed basic cuts at the time. In the case of the modern ones, they have a motor that works electrically and an interchangeable saw that offers greater types of cuts and versatility.


At the time of acquiring your jigsaw you must be very attentive to the power that it includes. They are usually in the range of 400 watts up to 800 watts. Depending on the power and capacity of your jigsaw, you can have greater variation with the speed regulator. Generally, they usually include three levels of work that will vary and you can adjust depending on the type of work, cut and material you are using.

Speed ​​regulator

In general, all jigsaws or jigsaws as they are also known, come with a speed regulator system, which is nothing more than the variation or intensity with which the blade will go up and down to make the cuts. If you set it to a lower speed you will have more control over the cut for better precision. On the contrary, at higher speeds it will be more difficult to control, but you will be able to make cuts in harder or more difficult materials.

mounting system

Current jigsaws have a modern blade removal system that does not require additional tools to correctly position the blade. What you do need to be very attentive to is the type of blade or clamping system with which your saw works, whether it is the T-system or the U-system. Neither is better than the other, but by keeping it in mind you will avoid buying for error leaves that do not adapt to the system with which your jigsaw works.

Choose the correct sheet

Be sure to keep the teeth per inch (dpi) in mind, so that they are appropriate for the thickness of the material you will be cutting. Try that between three and five teeth are always in contact with what you want to cut. For tricky corner or angle cuts we recommend using narrower blades and thicker blades for straight cuts. Analyze your project and have on hand the sheets you will need to obtain better results.

Precautions and safety

Remember to fix very well any surface or material that you are going to cut to prevent it from moving or rolling when you start working on it. You should always work in a well-lit place and keep in mind that the blades are usually partially exposed, so you should keep your fingers away from the path of the blade to avoid accidents or cuts.

The most popular brands

Choosing a jigsaw is not a simple matter given the variety that exists on the market. For this reason, we are dedicated to reviewing the characteristics of some models and comparing them with the opinions of users on the Internet. Now we want to share with you important information about the main brands, such as: BOSCH, MAKITA and DEWALT.

Robert Bosch was a German precision mechanic who founded his own company in 1886 under the name ROBERT BOSCH GMBH in Stuttgart, Germany. His first achievement in the field of mechanical engineering was the installation of a magneto ignition device in a vehicle engine.

This company quickly expands throughout Europe in the United Kingdom and France and, in America in the United States, thanks to the innovations made in the automotive sector with regard to the ignition of automobile engines, automotive services and fuel injection systems. diesel.

BOSCH is a company with cutting-edge technology. Its production is diversified and includes: parts and systems in the automotive sector, machinery for construction, agriculture, tools for industrial and home use, among others.

One of the tools that this brand produces are electric jigsaws. Designed with an ergonomic handle, they are characterized by being powerful, robust and high-precision to carry out demanding jobs as professionals. Its long-lasting blades allow clean cuts in different materials such as metal and wood. They also have an anti-splinter protection system and a dust extraction kit.

Some saw designs have a pre-cut locator and a self-adjusting rip fence for precise cuts. These tools come with a slide-out cart for easy portability.

The MAKITA ELECTRIC WORKS company was founded in the city of Nagoya (Japan) in March 1915 by Mosaburo Makita. In the middle of the 20th century, this brand was dedicated to the production and sale of electric brushes. After a series of transformations, he began to sell and repair electric motors and transformers.

With 11 manufacturing plants around the world, Makita is a renowned producer that excels in producing high-quality portable and electronic tools, with a wide range of over 500 models.

One of the electronic tools of this brand are electric jigsaws. Designed with a non-slip grip and a closed handle, they provide a better grip and handling. It is equipped with a forced air current system on the work area to facilitate more clean cuts.

MAKITA, in the table saws, has incorporated an axis to avoid unexpected movements and in this way achieve curved cuts of great precision. They also have a dust protection system and a transparent protector against particles. They are balanced and produce few vibrations.

DEWALT is an American company founded by Raymond E. DeWalt in 1924. It began in the market for handy tools with the invention of the radial arm saw and other woodworking machines.

With the acquisition of the state-of-the-art tools brand in the woodworking market, ELU, DEWALT was able to expand and diversify its electrical and cordless equipment, among others. With a history of more than 90 years in the power tools market, it is well recognized worldwide.

Currently this company specializes in the production and sale of portable power tools, as well as quality and durable accessories. Proof of this are the jigsaws, which have a powerful motor to make precise, beveled cuts and excellent finishes. They are ergonomically designed and have a rubber grip that eliminates vibrations.

They also feature a blower and dust removal adapter to improve visibility of the work area. It has recently developed innovations in these items with the addition of a Li-Ion battery.

Frequently asked questions

Q1: How to make a jigsaw guide

A jigsaw guide is a support that allows you to make sawing cuts with the jigsaw more precisely. To make your own jigsaw guide, you can use two long MDF or plywood boards, one that is 1 cm thick and the other that serves as a stop so that the jigsaw can work without deviating in its path. The guide must be attached to the material to be cut using dams or clamps for it, to prevent the guide from moving and the cut to come out crooked.

You can also use 2 aluminum sheets one meter long, with a threaded rod, nuts and washers. The rod is cut into four parts of 10 cm each, two holes are made in the aluminum sheets and the rods are placed at each end, making a kind of rail, fixed with the nuts and washers. The jig is placed in position and with a template the center of the guide is removed so that you know where you have to put the wood that you are going to cut. You mark your lines, hold the wood with clamps and the jigsaw should move between the guides straight without deviating.

Q2: How to cut straight with jigsaw

To cut straight with the jigsaw, you must choose a new blade that is compatible with the type of material to be worked on. Prepare your workstation to be suitable for sawing with your saw and wear safety glasses to protect your face. As for the saw blade, you should use the one with the wide tooth on the back, because they are more precise in the longitudinal guide.

Once the work area is prepared, you only have to firmly fix the material to be worked, using soldiers or dams for it, then you must place the jigsaw in the guide channel, inserting the tool into the material to be worked with pressure. In this way you will be able to make straight, transversal cuts or with angles of up to 45°, without much effort.

Q3: How to make a jigsaw table and how to attach the jigsaw to a table

To make a table for your jigsaw you need a board, place the jigsaw on the board at a distance of 10 cm from the front, centering the tool so that the base is parallel to the sides of the board. Then you need to glue a few pieces of 3mm MDF around the base of the saw, and a piece of plywood to the front of the tool for support.

The fixing of the saw to the board will be done with four sets of plugs, wing nuts and washers of 5 cm in diameter, mark the points where you must drill the four holes for the bolts in the board and then fix these plugs in their position. Remember to reinforce the board with some strips that protrude about 5 cm on the sides and fix them with 3 screws. Now you fix the jigsaw to the board with the wing nuts and your jigsaw will be attached to the table.

Q4: How to miter with a jigsaw

These equipments are ideal for making this type of cut, being suitable for work with skirting boards in the corners, because they allow the formation of a square between two pieces. To make a 45º cut with a jigsaw, it is necessary to loosen some screws that are below the base of the tool.

Then you must choose the angle you want for your work, the choice of 45º being available in

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *