Clean white walls

White walls bring freshness and naturalness to any room. However, compared to bright shades, stains and dirt are often more visible on white. For this reason, having homemade alternatives that allow them to be left as new without having to go to the painter turns out to be a good option.


Dirt will always be present in the home, but even more so if you have a white wall. In addition, there are countless situations that favor the appearance of stains, such as: splashes, a decorative project, the games of children and pets and even humidity.

But, in order for the family to be able to enjoy each of the spaces in the house, it is essential that they are hygienic. So, to clean the stains on a wall, you could use certain tricks that involve the use of some elements, such as a container, a sponge, a cloth and putty, as well as water, soap, vinegar, baking soda or bleach.


wall preparation

When starting the task of removing stains from a white wall, the entire room must first be prepared for efficient results. To do this, remove the furniture, since in addition to avoiding staining it, it provides more comfort when performing the task.

On the other hand, it is also recommended that you cover the floor with some sheets instead of a plastic sheet, since the latter tends not to absorb water, increasing the risk of falling.

In reference to the walls, remove the dust lodged on them, either with a broom, a vacuum cleaner or a cloth. Likewise, if there is glue, nails or plugs, they must also be removed and the imperfections covered with a little putty.

Some cheap and practical alternatives for a new wall

If you still do not know how to clean the walls of the house, you will have to know that cleaning will depend on the type of finish they have. On the one hand, latex paints only accept water and multi-purpose cleaner, on the other hand, oil paints accept cleaning with various products. Other alternatives for white walls are tiles, marble and wood, which may also require the use of specific products for their treatment.

  1. latex painted walls

To clean plastic or latex paint walls, combine a small sample of mild all-purpose cleaner and warm water in a bucket. Once the mixture is ready, proceed to soak a sponge and pass it through the walls. Having already verified that the wall is clean, change the water in the bucket and repeat the operation with a clean cloth to remove the product.

  1. Walls with oil paint

With these walls you can use various cleaning products, either to remove food remains, splashes, stains and even the drawings of the little ones. One of the most common and effective alternatives is to prepare a mixture of water, dish detergent and a little vinegar in a bucket, you could even add a tablespoon of baking soda to it to act as a bleach.

Now, if the stains are difficult, you could well use a degreaser ; especially if they are the kitchen walls. On the other hand, if what you are looking for is to remove damp stains from the wall, you could mix one part of bleach with three parts of water. In both cases, use a sponge to pass it through the walls with the prepared product. If the surface is rough, pass the sponge with circular movements and in the smooth areas make vertical movements.

Having already applied the mixture, let it act for a few minutes, while you change the contents of the bucket for clean water. All that remains is to go over the walls, to clarify, until the water in the bucket remains clear. If the wall is very damp, you could pass a cloth or even better open the windows to ventilate the room.

  1. white wooden walls

Although wood is a frequent material on the floors, there are also rooms that have white wooden walls. This material is more delicate and sensitive to apply any product; but, it is also much more vulnerable to dirt . To achieve efficient cleaning, you should apply soap with a neutral pH and rinse with plenty of water.

  1. Marble

If your kitchen has marble cladding, you should be aware that cleaning must be both careful and thorough, so that it continues to maintain its qualities. Two very effective alternatives would be the use of baking soda or lemon.

In the first option you will have to make a paste by mixing baking soda and water. Then, place it on the wall to be treated and let it act for half an hour before removing it. Now, when using lemon you should cut it in half, rub it vigorously and remove it from the area with a damp cloth.


  1. tiles

Regardless of whether it is the kitchen or the bathroom, the first thing you should do is moisten the walls, either by opening the shower with hot water or putting water to boil and letting the steam dissipate into the environment.

Next, you can combine water with degreaser or use vinegar and ammonia, any of the products should be spread with a sponge on the tiles until the dirt is removed. In the case of joints you could use bleach and a toothbrush in order to achieve a better result.

Whenever you work near power outlets you should be careful, since the use of water in these areas is dangerous. Hence, the best thing to do is to cut off the electrical supply of the house and activate it once the cleaning is finished.

In short, despite the fact that you have to clean the dirty walls of smoke, mold, crayons or food splashes weekly; You should take advantage of the best time of the year, such as spring and autumn, to thoroughly clean all corners of the house. Getting a white wall is not a complex task, the important thing is to have quality products and tools that help you improve its appearance.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *