Home

Ideas to fight against the invasion of cables on your desk

One of the main problems we have when organizing our desk is cables. An aspect in which the main devices we use have a tendency to eliminate, but since professionals in the sector do not perform miracles, there are still many devices that have to continue using cables. So it is worth having some ideas to see how to fight against this invasion of cables or at least try to make the cables that we have on our desk disturb as little as possible, both visually and in terms of comfort.

Reducing is the key

As a preliminary step to seeing the different options with which we can hide the wiring, it is convenient to know what is the key to making this job easier: reduce the cables that we use in our desk as much as possible. A work in many current peripherals have elements that make the process easy.

As examples, we have keyboards and mice, which today are fully wireless and have a quality response. The same happens with the speakers, being able to resort to a model with Bluetooth connectivity if we want to remove another element from our environment. A task that modern Unifying connectors simplify, by controlling multiple devices with a single USB connector.

In what we are not going to be able to choose is in objects such as the monitor, which will necessarily have to carry both the electrical connection cable and the data cable, either through HDMI or DisplayPort. In these cases, it is advisable to repress the temptation to fully deploy the cable that the product has, unless it is strictly necessary. Rather, we should take the opportunity to keep the cable as short as possible, hiding that excess cable behind the monitor or the tower, whenever possible.

flanges

If you are looking for a simple and low cost solution to organize your cables, cable ties are the answer to what you need. Identical to those used for all kinds of hardware jobs, these cable ties make it easy to create a compact bundle of cables, preventing them from being scattered all over your desk.

Its installation is as simple as placing the cables inside the flange of the cable tie, inserting its tip into the insertion area and gradually pulling until the cables are in an optimal position and properly tightened. Once we have the cable package compacted, we no longer have to cut the excess plastic from the flange to complete the assembly. The process is repeated as many times as necessary, and the cable package can be shaped and oriented as necessary. As an inconvenience, if you have to remove a cable from the package, it is very likely that you will have to remove all the ties and repeat the process.

the velcros

As an alternative to flanges, with greater comfort and at an attractive price, we have velcro. These velcros work on the same principle as zip ties, but have the advantage of being able to open if necessary. So if we need to change any of the cables that we have inside, we just have to open the necessary strips, make the change and close them again.

As with other options, it is interesting to choose the most suitable models for our specific needs, given that the length of the flange and its equivalent diameter vary. It is always a good idea to choose a size slightly higher than what we need, so that we do not have problems when moving the cables. In case of excess, just tighten the Velcro a little more to absorb that excess.

gutters

Raceways are another interesting solution when it comes to hiding and keeping cables under control. These gutters consist of a rectangular plastic casing, inside which we are going to house the cables. The advantage of the channel is that it is placed against the wall, for which the piece includes a plastic adhesive on the back of it, which allows the position of the cables to be maintained as long as they do not exert excessive tension. on the piece.

This aspect also makes its installation easier, to which the design of the two layers of the gutter also contributes. Specifically, the upper part can slide over the lower part through side tabs, so that once the cables are inserted inside, it is enough to slide that upper tab so that they are hidden. Additionally, it is also possible to snap the two parts together to close the gap. As a tip, take into account the thickness of the cables when choosing the trunking, so that everything fits as it should. And in case you want to place or run the cables on the ground, bet on a semicircular cable duct, which does not pose a risk of tripping when moving.

Let your imagination fly

If these remedies are not enough for you, there are thousands of creative solutions to keep cables hidden on your desk. One of these options is to place a strip at the bottom of the desktop, so that it is easy to hide the cables here and only have the plug of that channel in sight.

Another option is to use the cable organizers, with which we can direct them along the desk in the way that suits us best. Some of them are used for several cables, so everything is much easier if we use them correctly according to our needs.

As a final tip, it is important to be creative. Don’t worry about going out of the ordinary or trying things out until you find the most suitable combination for your desktop. After all, it is your workplace, so nobody better than you to decide how you want things to be placed and organized.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *