Home

Return your toilet lid to its original whiteness. It is very simple!

Over time, the toilet lid begins to lose its usual shine and color, turning yellowish. This situation is more common than you think, with many factors influencing its deterioration. But don’t worry, it’s very easy to bring it back to its usual appearance.

There is nothing better than entering the bathroom of our home and enjoying a clean and fresh environment. However, keeping these spaces sparkling is usually a task that sometimes gets out of hand, since it is necessary to be attentive to certain care regarding the cleaning method. 

In this sense, it is necessary to use special detergents and ventilate the room every time you take a bath, avoiding the accumulation of moisture. Likewise, you must carry out periodic maintenance on the sink, toilet, bathtub and on the tile of both the floor and the walls. But, of all these elements that make up the bathroom, the toilet lid is one of the most vulnerable to dirt and the impact of bacterial agents. All this generates an unpleasant yellowish appearance in the piece, which, although it may not seem like it, is very easy to eliminate.

Why does the toilet lid turn yellow and how can you fix it?

Perhaps you have at home the best toilet seat of the moment (In this link you will find several products to analyze), however, this does not prevent the gradual loss of its brightness and whiteness. In any case, you should not worry, but you should get down to work to solve this situation. In this sense, it is important that you know, in the first place, why the material turns yellowish. Thus, later on we will indicate some effective recipes to eliminate that annoying color from the toilet lid.

It is a fact that when entering a bathroom and seeing that the toilet lid is not very shiny, we immediately assume that it is a lack of cleanliness. However, this theory is not always true. The yellowish color acquired by the material of said piece can be associated with many factors, one of the main reasons being the use of incorrect detergents, the ravages of humidity and of course, we cannot ignore the inclement deterioration caused by the passage weather.

daily cleaning

When purchasing a WC cover, it is recommended to read the instruction manual, in order to know the manufacturer’s recommendations, being a step that many users usually skip. What these people do not take into consideration is that no matter how intuitive a product may seem, there are certain guidelines to extend its useful life while maintaining a good appearance. This is the case of the material of the toilet and the type of detergent suitable for cleaning it.

It is no secret that the different cleaning products have a series of chemical particles, which may have a greater or lesser concentration, depending on the laboratory they come from. Thus, by being in direct contact with the material of the toilet on a regular basis, these chemicals will begin to deteriorate the surface, taking away its color. Therefore, it is important to follow the manufacturer’s instructions and not apply any detergent.

Consequences of humidity

Perhaps you have heard about water hardness. This means that the liquid that comes out of the tap in our homes has a concentration of magnesium and calcium, which are two types of mineral salts. These particles generate a completely natural chemical reaction, such as that exerted by calcium when combined with oxygen, which produces the well-known lime that sometimes deteriorates the useful life of some of our appliances. In the particular case of the WC lid, the sum of all these minerals accumulated on it progressively deteriorates the upper film of the material. For this reason, you will need to maintain good airflow within the bathroom both after you finish cleaning it and after you shower. The use of this measure will significantly decrease the accumulated water vapor.

Recommendations to restore whiteness and shine to the toilet seat

Now that you know the possible causes of the premature deterioration of the toilet seat, you will need to put into practice some recommendations that will restore its whiteness and shine in the blink of an eye. The two products to use are bleach and salfumán, which have highly effective active whitening properties. These are two substances that are easy to acquire in any department store, but they must be handled with an adequate level of precaution. 

Especially be aware that inhalation in a space with limited airflow could cause serious poisoning. In addition, when using them you will have to wear gloves and in the specific case of salfumán use a face mask. Here are some mixtures to whiten your toilet:

bleach and hydrogen peroxide

Bleach usually has several presentations such as soapy, flavored and classic. Precisely, the latter is what we require for the preparation of the lightening mixture.

The first thing you should do is take a container the size of a glass and pour a generous amount of said bleach, being necessary to introduce it in the microwave for a very short period of 30 to 40 seconds. Then, you must fill the remaining space in the container with hydrogen peroxide and mix with a plastic or wooden palette. In this way, you can proceed to apply the product on the WC lid with a sponge, allowing it to rest for 30 to 60 minutes. After this time, repeat the process to finally wash with plenty of water.

soapy lye and water

Another highly effective mixture is soapy bleach and a moderate amount of water, which you should pour into a plastic container and stir gently with a paddle. The purpose of adding water is to slightly decrease the alkaline salts present in the lye.

Regarding the application procedure, we have that it is similar to that of the previous mixture. Only this time, after applying it with the sponge on the surface of the toilet, you will need to let it sit for 15 to 20 minutes.

salfuman and water

The hydrochloric acid known as salfumán, will return the original tone to your WC cover with just one application. Of course, due to its high concentration it is important that you mix it with water before spreading it on the toilet. Then, let it rest for approximately five minutes and remove the product with plenty of water. Remember to avoid direct contact with the skin.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *