Opinions about Bosch PKP 18 E
Main advantage:
The product has a power of 240 watts, with an efficient electronic temperature management system. This translates into a constant and fluid output of material, so that nothing stops you when working.
Main disadvantage:
It is possible that you will receive a gun with an English type plug, instead of the European one that is usual. Something that is easy to solve, buying the corresponding adapter.
Verdict: 9.8/10
A high-quality gun with all the Bosch technology, with high efficiency when it comes to heating the material and considerable comfort of use, with which to be more productive when it comes to gluing what you need.
Main Features Explained
heating system
One of the main advantages of this product is the heating system it offers, which places it among the best silicone guns on the market today. Specifically, this system has all the Bosch technology in this field and that is common in other similar products, such as heat guns or heat guns.
In this model, these heating elements have a modern electronic control system, which is responsible for generating rapid and efficient heating. Something to which the 240 watts of electrical power that the product has contribute, so you will not have to wait too long for the silicone or the material you use to be at the precise temperature. Something that allows you to achieve an operating temperature of about 200 degrees, so the fluid heating of the materials will not be something that you should worry about.
Nor will you have to worry about temperature losses once you start working, since these heating elements are responsible for maintaining a constant temperature at all times. An ideal system to dispose of flux material continuously, even if you apply it at a high speed on the work you are doing. In these circumstances, the gun will continue to heat the silicone or the corresponding material, so you don’t have to wait for it to be available and hot.
pouring system
Another aspect of this product that raises the best opinions is the system for pouring the molten material. To do this, the model has a large mouthpiece but with an extremely fine design. A combination that differs from the conical and thick nozzle that we usually find in other silicone guns on the market.
This design has several advantages. One of them is that it is easier to keep the tip warm, due to its design, so that the pouring of the material is much more effective when working. Something that is also perceived in the comfort when it comes to reaching where it is necessary to deposit the silicone, since the elongated format of the tip allows reaching the holes and recesses that other thicker models do not have.
As a last advantage of this tip, and of the pouring system, as it is a fine tip, we obtain a smaller amount of material, which allows us to be more precise in its use, avoiding the stickiness and excesses typical of other models of worse quality. quality. An aspect that also helps the push button of the pistol. This pusher tightens the bar precisely as we need more silicone, so this dosage is even more efficient. So much so that the usual losses of material do not occur when the gun is resting on the table.
By the way, so that you have everything clear, this product is compatible with all types of hot melt adhesives with a diameter of 11 millimeters and lengths from 45 to 200 millimeters. So you can use silicone and also glues and other materials when working.
Safety of use
Since we are talking about a product that works with heat, our analysis would not be complete if we did not take a look at the security functions that this model incorporates. Among them, we remember again that electronic heating system, which is responsible for preventing the gun from reaching an excessive temperature and overheating beyond what is recommended.
Another aspect that contributes to the safety of this silicone gun is its format. The handle is a considerable distance from the pouring area, mainly thanks to that elongated tip. In addition, the rest of the elements that are close to that handle do not get hot, due to the thickness and quality of the materials with which the gun is made. Something that helps reduce the risk of burns when pouring the molten material, by moving away the hot areas of the hand and the area of operations. Incidentally, this material makes it easier to clean the gun and its nozzle, which are perfect just by wiping them with a damp cloth, but always without letting the material dry completely, of course.
As a finishing touch, the pistol also has a support bracket, with which we can leave the pistol safely supported on the table when necessary. This stirrup has a suitable design so that the pistol does not fall in case the table moves or we give it a light blow, although obviously it does not do miracles if the blow is stronger. In any case, we are talking about additional details that justify the price increase of this pistol compared to Chinese and low-quality models, which are the most frequent on the market.
